PVC Cleaner

AGM Cleaner (970)

AGM cleaner (universal clear) for cleaning pvc, cpvc and pipes and fittings Surface. Contact Supplier AGM Cleaner +92-321-2248975

Sizes available 120ml, 237ml, 475ml & 946ml packing.

Manufacturing standards meet as per USA product.

Extremely flammable

Ingredients:
Acetone 67-64-1
Methyle Ethyle Ketone 78-93-3
cyclehaxanone 108-94-1
Resin 68648-82-8
HMIS rating H-3 F-3 R-1

 

What is PVC Cleaner / Adhesives ?

 

When working with PVC pipes and fittings, it is common to use PVC cleaner and adhesive to ensure secure and leak-free joints. PVC cleaner and adhesive are two separate products used in the joining process. Here's a brief explanation of each:

1. PVC Cleaner: PVC cleaner is a solvent-based solution used to clean and prepare the surfaces of PVC pipes and fittings before applying adhesive. It is typically a clear liquid that helps remove dirt, oil, grease, and other contaminants from the surfaces. Proper cleaning ensures better adhesion and improves the strength of the joint.

To use PVC cleaner, follow these general steps:

• Ensure the pipe and fitting surfaces are dry and free from any loose debris.
• Apply the PVC cleaner using a clean cloth or applicator, thoroughly covering the areas to be joined.
• Allow the cleaner to evaporate completely, usually within a few seconds or minutes, depending on the product.
• Avoid touching or contaminating the cleaned surfaces before applying adhesive.

2. PVC Adhesive (Solvent Cement): PVC adhesive, also known as solvent cement or PVC glue, is a strong adhesive specifically designed for bonding PVC pipes and fittings. It is available in different types, such as regular, medium, and heavy-bodied, to suit various pipe sizes and applications.

To use PVC adhesive, follow these general steps:

• After cleaning the pipe and fitting surfaces with PVC cleaner, apply a thin, even layer of adhesive to both surfaces using a brush or applicator.
• Join the pipe and fitting together while the adhesive is still wet, ensuring they are properly aligned and fully inserted.
• Hold the joint firmly for a few seconds to allow the adhesive to set and create a strong bond.
• Avoid disturbing the joint until the adhesive has fully cured, which typically takes several hours or as per the manufacturer's instructions.

It's important to note that the specific brand and type of PVC cleaner and adhesive can vary. Always refer to the manufacturer's instructions and guidelines for the particular products you are using to ensure proper application and adherence to safety precautions. Additionally, follow any local building codes and regulations related to PVC pipe installation.